To ensure the disinfection of production lines, a powerful automated washing complex is used.

To keep the equipment clean not only guarantees the quality of the finished product and the absence of complaints, but also increases the equipment service life exponentially, which is a significant expense item of any enterprise.

• The CIP station is designed for in-place circulation washing and disinfection of process equipment and pipelines.
• The hardware and software complex of the CIP station allows solving the following tasks:
• Preparation of detergent solutions (heating the solution to the required temperature, bringing the concentration to the prescription).
• Dosing of disinfectant in the pipeline supplying the solution to the equipment.
• Maintaining the prescription temperature of the washing solution in the stream.
• Maintain the required amount of detergent.
• Maintaining the required volume of cleaning solutions and water in the compartments of the CIP station.

Automation of CIP-station systems optimizes energy consumption, reduces the duration of cleaning containers and pipelines, ensures repeated use of detergents, maintains a predetermined temperature and concentration of detergents in an automatic mode, ensures high accuracy of dosing concentrates.

Auto mode

• Installation of technological parameters and modes of washing;
• Preparation of detergent solutions with specified temperature parameters and bringing the concentration of detergent to the specified values ​​in the automatic mode;
• Automatic maintenance of the temperature of washing solutions in the washing process;
• Automatic maintenance of the volume of liquids to a specified volume;
• Controlling the flow rate of liquids through pipelines;
• Changes in the supply of detergent solutions, the duration of each stage of washing, temperature parameters and concentration of detergents;
• Measurement, control and adjustment of process parameters;
• Control of position of disk locks.
• Control the flow of detergent solutions in the supply pipe.
• Control of electrical conductivity in the return pipeline.
• The capabilities of the CIP-station are determined by the number of tanks for the solutions, the performance of the pumps, the class of valves, metering devices and the level of automation.

Semi-automatic mode

• Manual operation of the butterfly valves;
• Manual selection of washing facilities;
• Automatic temperature maintenance;
• Manual dosing of concentrated solutions;
• Monitoring the concentration of detergent solutions using a conductivity meter;
• Option: Dosing pumps.

• Pump of washing solutions, fresh water, recycled water. It is equipped with a Baumer (Germany) dry running protection sensor and with a frequency converter Schneider-Electric (France), InoxMIM (Spain), Ebara (Italy).
• Pump return cleaning solutions, recycled water. It is equipped with a Baumer (Germany) dry running protection sensor and with a frequency converter Schneider-Electric (France), InoxMIM (Spain), Ebara (Italy).
• Alkali and acid concentrate dosing pumps. Tapflo (Sweden).
• Disinfectant dosing pump. ProMinent (Germany) Grundfos (Germany).
• Conductivity sensor. JUMO (Germany), Baumer (Germany).
• Heat exchanger for heating detergents. Funke (Germany), Kelvion (Germany).
• Butterfly valves. NIOB (Czech Republic), INOXPA (Spain), AWH (Germany), Kieselmann (Germany).
• Stop and control valves. Burkert (Switzerland).
• CMD. Comac (Czech Republic), Jumo (Germany), Sick (Germany), Baumer (Germany).
• Cable production. Helukabel (Germany).
• Pneumatic equipment. Camozzi (Italy).
• Automation and software. Schneider-Electric (France).